| |
Open Linear Encoder
with single-field scanning principle - easy mounting as a result of large mounting tolerances
- small dimensions
- high insensitivity to contamination
- signal-immunity against aging and temperature changes
- high traversing speed
- reference mark (accurate and repeatable from both traversing directions)
- two independent switch signals (optical)
for individual functions - Integrated subdividing electronics
up to times 100 interpolation - max. measuring length 12000 mm
|
| 
|
System
resolution
µm | Accuracy (*1)
±µm/measuring
length | Grating
pitch
µm | Output
analog (Upp) | Output
analog (Ipp) | Output
digital
(Subdividing factor) | |
see * | ±5, ±15 | 20 | MS 30.03 | -- | -- | 5 | ±5, ±15 | 20 | -- | -- | MS 30.23 (1) | 1 | ±5, ±15 | 20 | -- | -- | MS 30.63 (5) | 0,5 | ±5, ±15 | 20 | -- | -- | MS 30.73 (10) | 0,25 | ±5, ±15 | 20 | -- | -- | MS 30.43 (20) | 0,2 | ±5, ±15 | 20 | -- | -- | MS 30.53 (25) | 0,1 | ±5, ±15 | 20 | -- | -- | MS 30.83 (50) | 0,05 | ±5, ±15 | 20 | -- | -- | MS 30.93 (100) |
| | * = depending on
external Subdividing | (*1) = depending on tape carrier | | | | Max. measuring length: | steel tape scale to 111940 mm | | Standard measruing length: | from 120 mm to 11940 mm | Position of the
Reference mark:
(RI) | Standard: in the middle of the measuring length
On request: one end or other custom location | | Output analog: | typical 1 Vpp | | Output digital: | square wave signals (single ended)
with integrated Subdividing Electronics square wave signals (differential) via Line Driver RS 422 standard
with integrated Subdividing Electronics
with analog signal switch-over for setup | | | Tape carrier:
Different types
are available
(Downloads at the end
of this side) | MS 30.xx MO = steel tape scale without carrier
MS 30.xx MK = steel tape scale with adhesive tape
MS 30.xx MP = steel tape scale in aluminum carrier with clamping element,
carrier glued
MS 30.xx MT = steel tape scale in aluminum carrier with clamping element,
and mounting bolts holes
MS 30.xx MA = steel tape scale mounted onto aluminum carrier,
and mounting bolts holes
MS 30.xx MS = steel tape scale mounted onto steel carrier,
and mounting bolts holes
|
| | | Accessories (optional): | | Tape mounting tool TMT 30 MK
For safe and precise mounting of the steel tape scale - mount TMT 30 MK instead of the reading head MS 30
- thread steel tape scale (version MK) and move along the scale length
- remove TMT 30 MK, mount reading head MS 30
| |
| | | (techn. adjustment in reserve) Dimensions and Mounting possibilities:
(for Adobe Acrobat 5.0 or higher) |
|
MS 30 Series
pdf